Aid Sticker

These peach or yellow and red or pink are actually a photo of hand painted roses. So the vinyl decal looks painted on your mixer. Kind of a vintage antique victorian fashion old country rose with some green vine type leaves, not modern, to fit in any classy kitchen. A good match also for a garden kitchen or rose pattern porcelain tea set china. -------------- Remeber you get two Rose Decal kits! Each Rose Decal kit is a total of 2 different decal pieces (mirrored left and right), with the largest piece measuring about 6.75 by 3.25 inches. -----------This vinyl is meant to last 5 years outdoors(!) so it will last in your kitchen as long as your mixer does. -----------Basic installation instructions, cleaning pad, and trouble shooting guide included FREE with order. Please do not use harsh chemicals like 409 as it may damage the graphics. For added protection a layer of shellac (which is always food grade) is acceptable. -----------Installation is easy. Clean, mark the location, Take off the sticky paper, press the sticker on your mixer, remove the protective top paper. Anyone can do it and it makes a GREAT GIFT! ------------The kit will not interfere with your accessories, the Pasta Roller Maker (PRA), Food Grinder (FGA), Juicer, Can Opener, Ice Cream Maker, Sausage Stuffer, Slicer Shredder (RVSA), Grain Mill, extra bowl, or pouring shield. ------------The decal will look great on your color; Empire Red, Orange, yellow, blue, white, black, grey, brass, bronze, cobalt blue steel, Cinnamon, copper, licorice, pewter, meringue, nickel, pearl metallic, cayenne, sage, onyx black ----------Note also if you send your mixer back to KitchenAid under warranty, so go your flames. This product is has no affiliation or endorsement by KitchenAid. The decal manufacturer is a third party vendor who likes and uses KitchenAid products but improves on their color scheme. *******Product includes the 2 large sized decal kits, instructions, and cleaning pad.

-----------With Hot Rod flames on your mixer, it gets tons of attention like your mixer should! Notice the nice color bleed, the pin stripping, and smell of envy it creates! Actual color bleeds and pin striping will be similar, but each is one of a kind due to printing variations. -----------This vinyl is meant to last 5 years outdoors(!) so it will last in your kitchen as long as your mixer does. -----------Basic installation instructions, cleaning pad, and trouble shooting guide included FREE with order. Please do not use harsh chemicals like 409 as it may damage the graphics. For added protection a layer of shellac (which is always food grade) is acceptable. -----------Installation is easy. Clean, mark the location, Take off the sticky paper, press the sticker on your mixer, remove the protective top paper. Anyone can do it and it makes a GREAT GIFT! ------------The kit will not interfere with your accessories, the Pasta Roller Maker (PRA), Food Grinder (FGA), Juicer, Can Opener, Ice Cream Maker, Sausage Stuffer, Slicer Shredder (RVSA), Grain Mill, extra bowl, or pouring shield. ------------The decal will look great on your color; Empire Red, Orange, yellow, blue, white, black, grey, brass, bronze, cobalt blue steel, Cinnamon, copper, licorice, pewter, meringue, nickel, pearl metallic, cayenne, sage, onyx black ----------Note also if you send your mixer back to KitchenAid under warranty, so go your flames. This product is has no affiliation or endorsement by KitchenAid. The decal manufacturer is a third party vendor who likes and uses KitchenAid products but improves on their color scheme. *******Product includes the 2 large sized decal kits, instructions, and cleaning pad.

-----------With Hot Rod flames on your mixer, it gets tons of attention like your mixer should! Notice the nice color bleed, the pin stripping, and smell of envy it creates! Actual color bleeds and pin striping will be similar, but each is one of a kind due to printing variations. -----------This vinyl is meant to last 5 years outdoors(!) so it will last in your kitchen as long as your mixer does. -----------Basic installation instructions, cleaning pad, and trouble shooting guide included FREE with order. Please do not use harsh chemicals like 409 as it may damage the graphics. For added protection a layer of shellac (which is always food grade) is acceptable. -----------Installation is easy. Clean, mark the location, Take off the sticky paper, press the sticker on your mixer, remove the protective top paper. Anyone can do it and it makes a GREAT GIFT! ------------The kit will not interfere with your accessories, the Pasta Roller Maker (PRA), Food Grinder (FGA), Juicer, Can Opener, Ice Cream Maker, Sausage Stuffer, Slicer Shredder (RVSA), Grain Mill, extra bowl, or pouring shield. ------------The decal will look great on your color; Empire Red, Orange, yellow, blue, white, black, grey, brass, bronze, cobalt blue steel, Cinnamon, copper, licorice, pewter, meringue, nickel, pearl metallic, cayenne, sage, onyx black ----------Note also if you send your mixer back to KitchenAid under warranty, so go your decals. This product is has no affiliation or endorsement by KitchenAid. The decal manufacturer is a third party vendor who likes and uses KitchenAid products but improves on their color scheme. Kitchenaid and the mixer shape are owned by Kitchenaid USA. *******Product includes the 1 large sized decal sheet, instructions, and cleaning pad.

The wonderful thing about Tiggers... is that this one can go right on your wall! This bouncy, trouncy, and fun Tigger wall decal is perfect for nurseries and bedrooms, and parents will love how easy he is to apply and remove, with no damage to the surface or sticky residue left behind. para;Includes (1) 18" x 40" sheet (11 decals).¶¶Fully Assembled Dimensions: 25.75" wide x 31.5" high.¶¶Assembled:para;Please note this product can only be shipped to the United States and Mexico.

RADStickerTM peel & stick, postage stamp sized, instant color developing dosimeter, is always ready and with you 24/7, stuck onto the back of your drivers license or anything you keep close, for any future radiation emergency. Non-electrical, reliable, rugged and useful for determining radiation exposure and if medical treatment required in a major radiological incident, such as a nuclear or dirty bomb explosion, nuclear power plant accident or mishandled radiation sources. "Based on information available to the NRC, an average of approximately 375 sources or devices of all kinds are reported lost or stolen each year in the U.S. -- that is, roughly one per day." RADStickerTM can help you to minimize additional radiation exposure to As Low As Reasonably Achievable, ideally

Available in a variety of sizes and styles, our soft, pliable, over-the-ear nasal cannula provides a better patient fit-ideal for long-term care. Also a smart choice for short-term oxygen therapy in a post-op setting.

Silicone Nose Pads, By Apex Healthcare Products - 2 Pair.

Decorate your brush your way! Arm & Hammer. Includes 141 individual stickers inside! 1 powered toothbrush. Water-safe stickers! Make brushing fun! Brush head is not replaceable. Batteries are replaceable. AAA batteries included. Made in China.

The MediBag Family First Aid Kit is a kid friendly first aid kit in a convenient carrying case. * Home Safety CD * 117 Items * First Aid Kit Contents: Kid-Friendly Organized Doctor's Bag, Kid-Friendly Crayon Bandages, 1/2 oz Eye Wash, Instant Cold Pack, Kid-Friendly Exam Gloves, Hypoallergenic First-Aid Tape, Sterile Gauze Pads, Conforming Gauze Roll Insect Sting Relief Pads, Antibiotic Ointment Packs Antiseptic Cleansing Wipes, Anti-Itch Ointment One Time use Thermometers, Plastic Disposable Tweezers Cotton Application Swabs, Burn Relief Gel Knee and Elbow Bandages, Kids QR - (stops bleeding instantly), Baby Sitter Pad (family info), Quick-Action First-Aid Flip Chart, Kid-Friendly Stickers, Medical Emergency Key Tag.

GREAT LOOKING DECAL. BRAND NEW. WE ARE VERY PROFESSIONAL. WHAT YOU SEE IS WHAT YOU GET. THERE IS NO BACKGOUND THIS, THE BACKGROUND IS WAX PAPER THAT THE DECAL STICKS TO.

Does your car have an unsightly rust spot or scratch? Patch it up with a magnetic auto bandage! It's easy to apply and can be removed without damaging a car. It's also great to have on hand in case you ding someone's car and you're having a hard time breaking the news. Just slap it on and lighten the mood! Auto-Aid is also MUCH cheaper than bringing your car to Maaco, so you can save more money for a new car!

The Loc8tor Lite can help you find missing items like keys, phones or even kids or pets by leading you straight to the homing beacons attached to your belongings. The LEDs on the handheld main unit can lead you to as many as 4 registered homing tags. When you activate the attached beacon, you'll hear it chirping and see it flashing, too. Includes 2 mini homing tags, 2 key ring loops and adhesive squares. Requires 1 CR2032 and 2 SR54 cell batteries, included. Loc8tor Lite Mobile Phone & Key Finder measures approximately 11 cm x 5.5 cm x 1.5 cm. Each Mini Homing Tag measures approximately 3.5 cm x 1.95 cm x 0.85 cm

This monster bundle deal includes: (1) Synthetic Leather Cover, Color: PURPLE, (1) Vinyl Skin Decal - As Shown in the Main Photo and (1) Screen Protector. ABOUT THE CASE: Designed to fit the Barnes & Noble Nook Color (Released Nov. 2010) and Nook Tablet (Released Nov. 7, 2011) devices ONLY. The case is a great alternative to our genuine leather style. This case is made from high quality synthetic leather and gives excellent protection to your Nook device. The device is securely held in place by elastic straps and is also held close with an outside magnetic clasp. The inside of the case has useful compartments to hold cards, driver license, money, and etc. ABOUT THE SKIN: Skins are made up of a superb vinyl material that is environmental friendly. With the skin decal on your device - it fits well into most accessories and cases and leaves no sticky residue upon removal. The installation is simple and does not come with instructions - the skin design is pre-perforated and requires no trimming. The Nook Color and Nook Tablet's back side edges are curvy; back skin will not cover all the way to avoid peeling. NOTE: Due to differences between monitor displays, actual color may vary slightly from image. This combo WILL NOT FIT: Original Nook Black and White eReader or Nook Touch.

This monster bundle deal includes: (1) Synthetic Leather Cover, Color: RED, (1) Vinyl Skin Decal - As Shown in the Main Photo and (1) Screen Protector. ABOUT THE CASE: Designed to fit the Barnes & Noble Nook Color (Released Nov. 2010) and Nook Tablet (Released Nov. 7, 2011) devices ONLY. The case is a great alternative to our genuine leather style. This case is made from high quality synthetic leather and gives excellent protection to your Nook device. The device is securely held in place by elastic straps and is also held close with an outside magnetic clasp. The inside of the case has useful compartments to hold cards, driver license, money, and etc. ABOUT THE SKIN: Skins are made up of a superb vinyl material that is environmental friendly. With the skin decal on your device - it fits well into most accessories and cases and leaves no sticky residue upon removal. The installation is simple and does not come with instructions - the skin design is pre-perforated and requires no trimming. The Nook Color and Nook Tablet's back side edges are curvy; back skin will not cover all the way to avoid peeling. NOTE: Due to differences between monitor displays, actual color may vary slightly from image. This combo WILL NOT FIT: Original Nook Black and White eReader or Nook Touch.

This monster bundle deal includes: (1) Synthetic Leather Cover, Color: PURPLE, (1) Vinyl Skin Decal - As Shown in the Main Photo and (1) Screen Protector. ABOUT THE CASE: Designed to fit the Barnes & Noble Nook Color (Released Nov. 2010) and Nook Tablet (Released Nov. 7, 2011) devices ONLY. The case is a great alternative to our genuine leather style. This case is made from high quality synthetic leather and gives excellent protection to your Nook device. The device is securely held in place by elastic straps and is also held close with an outside magnetic clasp. The inside of the case has useful compartments to hold cards, driver license, money, and etc. ABOUT THE SKIN: Skins are made up of a superb vinyl material that is environmental friendly. With the skin decal on your device - it fits well into most accessories and cases and leaves no sticky residue upon removal. The installation is simple and does not come with instructions - the skin design is pre-perforated and requires no trimming. The Nook Color and Nook Tablet's back side edges are curvy; back skin will not cover all the way to avoid peeling. NOTE: Due to differences between monitor displays, actual color may vary slightly from image. This combo WILL NOT FIT: Original Nook Black and White eReader or Nook Touch.